New CH.com Forum - Print Page

New CH.com Forum
http://www.clusterheadaches.com/cgi-bin/yabb2/YaBB.pl Daily Chat >> General Posts >> Spare CGA540 to CGA870 Adaptor http://www.clusterheadaches.com/cgi-bin/yabb2/YaBB.pl?num=1226636145 Message started by Marc on Nov 13^th, 2008 at 11:15pm

Title: Spare CGA540 to CGA870 Adaptor
Post by Marc on Nov 13^th, 2008 at 11:15pm

I've finished setting up my O2 tank refill setup and I've ended up with an extra CGA540 to CGA870 adaptor that I don't need. Let me know if you need one and it's yours. I took a picture of it, in case you're not sure:

START PRINTPAGEMultimedia File Viewing and Clickable Links are available for Registered Members only!! You need to

END PRINTPAGE

Marc

Title: Re: Spare CGA540 to CGA870 Adaptor
Post by ClusterChuck on Nov 13^th, 2008 at 11:20pm

KEWL BEANS!!!

You're a good man, Marc! THAT is the way to pay it forward!

Chuck

Title: Re: Spare CGA540 to CGA870 Adaptor
Post by [johnny] on Nov 14^th, 2008 at 11:32am

marc i was wondering if you would be so kind as to post a pic of your refill set up. thanks marc!

Title: Re: Spare CGA540 to CGA870 Adaptor
Post by Marc on Nov 14^th, 2008 at 3:54pm

-johnny- wrote on Nov 14^th, 2008 at 11:32am:

marc i was wondering if you would be so kind as to post a pic of your refill set up. thanks marc!

I put it up here, to avoid eating up more of DJ's bandwidth:

START PRINTPAGEMultimedia File Viewing and Clickable Links are available for Registered Members only!! You need to

END PRINTPAGE

There are 5 pages because I started with the really basic information, then proceeded from there.

There are shorter paths to take, but I wanted to be able to use/breath/refill all welding and medical oxygen tanks. That's why I set it up this way. When you are on the road, it is MUCH easier to find someone with a welding tank than a medical tank!!

(Thank you Chuck for letting me steal your CGA870regulator picture! :)

Marc

Title: Re: Spare CGA540 to CGA870 Adaptor
Post by [johnny] on Nov 14^th, 2008 at 4:14pm

thanks for posting that marc. yes the med tanks are harder to exchange on the road.

Title: Re: Spare CGA540 to CGA870 Adaptor
Post by Marc on Nov 14^th, 2008 at 5:47pm

-johnny- wrote on Nov 14^th, 2008 at 4:14pm:

thanks for posting that marc. yes the med tanks are harder to exchange on the road.

And...... with a CGA540 regulator, you can pop it right on a welding tank in emergencies. Once you start looking for them, you will see O2 welding tanks everywhere. Think about it: repair shops of all types, people's garages, construction sites, etc. I've gotten a hotel maintenance man to look the other way while I hooked up to his tank for 10 minutes.

I carry a little printed Cluster Card that explains a very little bit about why we need O2 NOW and that we'll talk later it.

Title: Re: Spare CGA540 to CGA870 Adaptor
Post by Jonny on Nov 14^th, 2008 at 8:55pm

Heres how I transfer. ;)

START PRINTPAGEMultimedia File Viewing and Clickable Links are available for Registered Members only!! You need to

END PRINTPAGE

Sorry, but every time I link an image it comes out as a link......So click and shut up!....LOL ;D

Title: Re: Spare CGA540 to CGA870 Adaptor
Post by Marc on Nov 14^th, 2008 at 9:45pm

Not for me :)

START PRINTPAGEMultimedia File Viewing and Clickable Links are available for Registered Members only!! You need to

END PRINTPAGE