New CH.com Forum - Print Page

New CH.com Forum
http://www.clusterheadaches.com/cgi-bin/yabb2/YaBB.pl Daily Chat >> General Posts >> ~02 regulator please help~ http://www.clusterheadaches.com/cgi-bin/yabb2/YaBB.pl?num=1250885762 Message started by Cluster Buster on Aug 21^st, 2009 at 4:16pm

Title: ~*02 regulator please help*~
Post by Cluster Buster on Aug 21^st, 2009 at 4:16pm

Where can i find a regulator for m 02 tank where regulator connects by a nut to the tank that is around 20-60 LPM? suppliers ive called highest I've found is 20, please help ASAP thank you

Title: Re: ~*02 regulator please help*~
Post by ClusterChuck on Aug 21^st, 2009 at 4:42pm

This is a company that I found, and seems to produce a good, compact, reasonably priced regulator that goes up to 25LPM.

START PRINTPAGEMultimedia File Viewing and Clickable Links are available for Registered Members only!! You need to

END PRINTPAGE

If you want a regulator that goes up to 60LPM, it will cost about twice the above amount. I don't have that link, right handy, but if you want it, I can find it for you.

Chuck

Title: Re: ~*02 regulator please help*~
Post by gizmo on Aug 21^st, 2009 at 4:44pm

Check Flotec ( START PRINTPAGEMultimedia File Viewing and Clickable Links are available for Registered Members only!! You need to

END PRINTPAGE )

Title: Re: ~*02 regulator please help*~
Post by ClusterChuck on Aug 21^st, 2009 at 5:56pm

gizmo wrote on Aug 21^st, 2009 at 4:44pm:

Check Flotec ( http://www.floteco2.com )

THAT is the name that I couldn't think of!!! (I had a senior moment)

Specifically:
START PRINTPAGEMultimedia File Viewing and Clickable Links are available for Registered Members only!! You need to

END PRINTPAGE

Thanks, buddy!

Chuck

Title: Re: ~*02 regulator please help*~
Post by Cluster Buster on Aug 21^st, 2009 at 6:05pm

yes could you please find me the link # I dont mind paying the extra $ thank you all

Title: Re: ~*02 regulator please help*~
Post by Cluster Buster on Aug 21^st, 2009 at 6:07pm

START PRINTPAGEMultimedia File Viewing and Clickable Links are available for Registered Members only!! You need to

END PRINTPAGE; do they work for this

Title: Re: ~*02 regulator please help*~
Post by Cluster Buster on Aug 21^st, 2009 at 7:20pm

START PRINTPAGEMultimedia File Viewing and Clickable Links are available for Registered Members only!! You need to

END PRINTPAGE
does it connect with this please I need to know

Title: Re: ~*02 regulator please help*~
Post by ClusterChuck on Aug 21^st, 2009 at 7:30pm

Cluster Buster wrote on Aug 21^st, 2009 at 7:20pm:

START PRINTPAGEMultimedia File Viewing and Clickable Links are available for Registered Members only!! You need to

END PRINTPAGE
does it connect with this please I need to know

When you call them to order the regulator tell them that you need a CGA-540 connector. That is the one that you will need to fit on that tank.

So order a regulator, 60LPM, CGA-540 connector.

Title: Re: ~*02 regulator please help*~
Post by Sean C on Aug 21^st, 2009 at 7:33pm

Looks like your in good hands, hope you get some pf time soon.

Sean.........................